Chimney Repair in Deerfield, WI Done Right by Hansen & Sons Chimney & Fireplace
Maybe you found chunks of mortar in the gutter last spring, or a brown water ring has started spreading across the ceiling beside your fireplace. Small clues like these are often the first signs that a chimney needs professional attention. Hansen & Sons Chimney & Fireplace is the oldest chimney and fireplace company in the greater Madison area, and Deerfield homeowners call us when they want chimney repair answers they can trust. Our certified, licensed specialists repair crowns, flashing, liners, and masonry with methods proven over more than 70 years of local work. We back every project with our Rock Solid Warranty and take the time to explain what caused the damage, so you understand the fix as well as the problem.
Why Is the Top of Your Chimney Crumbling While the Rest Looks Fine?
This is one of the most common patterns we see. The lower portion of a chimney may look nearly new while the top few feet are flaking, cracking, and shedding mortar. That difference comes down to exposure.
The section above the roofline takes the full brunt of Wisconsin weather on all four sides. It has no eaves or walls to shelter it. Snow sits on the crown for weeks, wind drives rain sideways into the brick, and freeze-thaw cycles hit hardest where the masonry stays wettest. Flue gases also cool as they near the top of the chimney, which can create condensation that soaks into the surrounding brick from the inside.
Signs that the upper chimney needs repair include:
- Mortar missing or recessed in the top several courses of brick
- Brick faces that are flaking, popping off, or crumbling
- Cracks running through the crown
- A flue tile that looks tilted, loose, or chipped
- Brick and mortar fragments collecting on the roof or in gutters
Depending on the extent of the damage, we may recommend tuckpointing, replacing individual bricks, or rebuilding the chimney from the roofline up. We usually pair that work with a new crown and cap to slow future deterioration. You will get a clear explanation of each option before any work begins.
Deerfield, WI: Norwegian Heritage and Eastern Dane County Charm
Deerfield is a welcoming village of roughly 2,500 residents in eastern Dane County, about 20 miles east of Madison. Norwegian immigrants settled the surrounding farmland in the mid-1800s, and that heritage still shapes the community’s friendly, hardworking character. Residents enjoy a small downtown, a strong local school district, and the kind of neighborly spirit that keeps families here for generations.
Nature is never far away. The Glacial Drumlin State Trail passes near the village and draws cyclists and walkers throughout the warmer months. The marshes and prairies of the Goose Lake State Wildlife Area attract birdwatchers and hunters. CamRock County Park and Lake Ripley are just a short drive away for hiking, mountain biking, and swimming. Deerfield’s mix of older homes near downtown and newer neighborhoods on the edge of town means we see every kind of chimney here, and we enjoy keeping them all in good shape.
What’s the Difference Between a Chimney Crown and a Chimney Cap?
Homeowners often use these terms interchangeably, but they are two separate components with different jobs. Both play a major role in keeping water out of your chimney.
The crown is the concrete slab that covers the top of the masonry around the flue. It should:
- Slope away from the flue to shed water
- Extend past the brick face with an overhang and drip edge
- Seal the top of the masonry so water can’t soak into the brickwork
The cap is a metal cover that sits over the flue opening itself. It should:
- Keep rain and snow from falling straight down the flue
- Block birds, squirrels, and raccoons with a mesh screen
- Help stop embers from landing on the roof
A chimney with a sound crown but no cap still lets water pour directly into the flue. A chimney with a good cap but a cracked crown still absorbs water into the masonry. We repair or replace both, and we often recommend stainless steel caps because they resist rust much longer than galvanized versions.
Is Your Chimney Tall Enough to Draft Properly?
Chimney height has a direct effect on how well smoke exits your home. Building guidelines commonly follow what is known as the 3-2-10 rule. A chimney should extend at least 3 feet above the point where it passes through the roof and stand at least 2 feet higher than any part of the building within 10 feet.
Chimneys that fall short of these guidelines can struggle in several ways:
- Smoke spilling into the room, especially on windy days
- Downdrafts that push odors into the house when the fireplace isn’t in use
- Sparks and embers exiting closer to roofing materials
- Fires that are difficult to start or keep burning
Short chimneys are often the result of additions, dormers, or second stories built after the original house. We can extend a masonry chimney using brick that blends with the existing stack. In some cases, a stainless liner extension or a specialized draft-improving cap offers a simpler solution.
Can Chimney Repairs Be Done During a Wisconsin Winter?
Some repairs can, and some are better saved for warmer weather. Mortar and concrete need moderate temperatures to cure properly. When temperatures fall below about 40 degrees, masonry materials can freeze before they set, which weakens the repair.
Work we can typically complete during winter includes:
- Stainless steel liner installation
- Chimney cap and chase cover replacement
- Damper repair or replacement
- Firebox repairs inside the home
- Temporary measures to slow an active leak
Crown rebuilds, tuckpointing, and larger masonry projects usually work best from spring through fall. If you discover damage in January, we can assess it, handle any urgent fixes, and schedule masonry work for the first stretch of suitable weather. An active leak or a damaged liner shouldn’t wait, so call us if you notice either one.
Can a Cracked Clay Liner Be Resurfaced Instead of Replaced?
Often, yes. If a clay tile liner has cracks or gaps but is otherwise structurally intact, resurfacing may restore its protective function without a full relining project.
Resurfacing uses a heat-resistant ceramic or cast-in-place coating applied to the inside of the existing flue. The material fills cracks, seals open mortar joints, and creates a smooth, continuous surface.
Factors that help determine whether resurfacing is a good fit include:
- How many tiles are cracked and how severe the damage is
- Whether any tiles are missing, shifted, or collapsed
- The type of appliance and fuel the chimney serves
- Whether the flue is properly sized for that appliance
When damage is widespread, or when you are adding a stove or insert, a stainless steel liner is usually the stronger choice. A video camera inspection lets us see the liner clearly and recommend the right approach. Financing is available for liner projects.
What Are Your Options for a Chimney You No Longer Use?
Many Deerfield homes have a chimney that once served an old furnace or a fireplace that has since been closed off. An unused chimney still faces the weather and can still cause leaks, attract animals, and shed loose brick.
You have several options:
- Cap and seal it: A full-width cap and sealed flue keep out water and wildlife with minimal cost.
- Remove it above the roofline: Taking the stack down and patching the roof eliminates the most exposed masonry.
- Restore it for use: Repairs and a new liner can return it to service for a gas insert or wood stove.
- Remove it completely: Full removal frees up interior space but is a larger project.
We’ll help you weigh each option based on your home, budget, and future plans.
Ready for a Sturdier Chimney? Schedule Your Deerfield Repair With Hansen & Sons
The easiest chimney repair is the one handled before water reaches your ceilings, framing, or flue. If you’ve noticed crumbling brick, a rusted cap, or stains near the fireplace, our specialists can pinpoint the cause and give you an honest plan to fix it. Call us today or request an appointment through our website. Homeowners across the Madison area have trusted our A+ rated company for generations, and we’d be glad to earn that same trust in Deerfield. Ask about financing for larger repairs, or visit our in-store showcase if you’re considering a new insert while the work gets done.
